logo

Air Conditioner Standy Power Saver

Air-Conditioner-Standy-Power saver

Item: Air Conditioner Standy Power Saver

Short Description: Standby power, also called vampire power, vampire draw, phantom load, or leaking electricity (“phantom load” and “leaking electricity” are defined technical terms with other meanings, adopted for this different purpose), refers to the electric power consumed by electronic and electrical appliances while they are switched off (but are designed to draw some power) or in a standby mode.For Air Conditioner,when it is not working,its plug is connected to electricity,and consume electric power,too. This Standy Power Saver can help your air conditioner take “0”power when it is in  in a standby mode.

Feature: Save 20% power for air conditioner

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Air Conditioner Standy Power Saver
Features and Principle for “Air Conditioner Standy Power Saver”

Works Principle

Build intelligent power-saving management chip into the ordinary socket, cut off the electrical mechanical relay through the AC line, into a DC static standby (standby power consumption increased from tens of watts of electrical appliances and even a few microns down to a few milliwatts watts), not changing user habits, thus automatically power-saving features.
Automatic code recognition application of energy-saving air-conditioning outlet, does not affect the use of other remote control devices.

How to operate?

Connection: The air conditioner plug is first inserted into the Standy Power Saver plug socket, then put Standy Power Saver into original A/C plug socket.
How to achieve power saving function: Use the remote control toward Standy Power Saver and click one time or double-click until the Standy Power Saver began to work ,that means air conditioner enter into the normal working condition.
If you want to turn off the air conditioner, press the remote control to turn off air conditioner normally, about 60 minutes after turn off the air conditioner ,the A/C unit will completely power down, thereby avoiding air conditioning consumes power when in standby, to reach energy-saving purposes.
To start the air conditioner again, repeat the steps above.

Main features

Solve problem of Standby power consumption: using patented intelligent control technology to effectively solve the problem of electrical standby power.
Alloy using PC: Using a high flame resistance and insulation PC alloy plastic, glow wire 850 degree burn does not burn. Heat distortion temperature reaches 105 degrees. Shock, pressure, heat, resistant to moisture.
Fire retardant properties: The manager flame retardant housing selection is excellent, containing anaerobic factors, fire feature prominent case of fire does not burn.
Standard socket design: for multi-national standard plug.
Security design: effectively prevent damage to automatically turn down air conditioning, etc. due to the air conditioning.
Surge Surge: absorption features built-in voltage-sensitive detection devices, can effectively absorb surges, spikes and surge current suppression effectively prevent damage to the air conditioning.

Insulation resistance

Maximum voltage

Surge Protection

Rated Power

For Maximum Power

500MΩ

250V

≤1000 A

10 A

2000W

Buying guide on “Air Conditioner Standy Power Saver”
  • The Air Conditioner Standy Power Saver is available for retail and wholesale;
  • The place of origin is in China,when you buy one or a small quantity,please consider freight into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected] .
General Knowledge on “Air Conditioner Standy Power Saver”

 

Send Inquiry To Us

Your email address will not be published. Required fields are marked *