How to install air conditioning

    Attentions:
     For indoor unit:
     1,Indoor unit should be 180-195cm.
     2,Air mouth shouldn`t face to room door.
     3,Electrical plug should be installed over the machine 20cm.
     4,Indoor unit shelf must keep level,strong enough to support unit.
     5,Installation area shouldn`t be shined by sun directly.
     6Installation area should be close to the palce of drain water .
     7,Wall hold should be under indoor unit`s water mouth.
     8,Check wall quality,and choose good plastic nylon expansion plug.
     
         

     For outdoor unit:
     1,Air conditioning bracket must be very strong,must have very good surface quality with high quality coating.
     2,Bracket must be installed level.Otherwise will produce dange and also produce noise.
     3,Outdoor unit shouldn`t be joint with wall,must keep a small space.
     4,It`s better to keep outdoor unit 1.7m high than ground.
    
     Following is steps to install an air conditioning,
    
     Step1, To measure the area where you want to become cool and calculate the size of the air conditioner you will need.
    
     Step2, Decide the window you want to install the air conditioner in and measure its opening. The air conditioner you buy needs to fit into the opening and all air conditioners aren't the same size.
    
     Step3, Install the mounting brackets that came with the air conditioner unit (be sure to follow the manufacturer's directions).
    
     Step4,Slide the air conditioner into the window opening and fix it to the mounting brackets (again as per manufacturer's instructions).
    
     Step5,Lower the window down onto the top of the unit.
    
     Step6, Pull out the extensions on each side of the air conditioner and attach them to the window frame.
    
     Step7, Using a piece of foam (may be provided by the manufacturer), seal between the top of the air conditioner unit and the window.
    
     Step8, Attach the drainage hose (if supplied) to the outside of the air conditioner.
    
     Step9, Caulk around the outside of the unit to help keep the warm air outside.
    
     Step10,Plug in your air conditioner, turn it on and enjoy that cool air.

If we know more ways about how to install air conditioning,we`ll publish.