logo

July, 2015

now browsing by month

 

Air Conditioner Fan Motor YDK-18-4

Air Conditioner Fan Motor YDK-18-4 1

YDK-18-4

Item: Air Conditioner Fan Motor YDK-18-4

For air conditioner indoor unit as replacement part.

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Air Conditioner Fan Motor YDK-18-4
Models & Details for “Air Conditioner Fan Motor YDKS-18-4”

YDK-18-4-image3 YDK-18-4

YDK-18-4-image2

Buying guide
  • The item  is available for retail and wholesale;
  • The item takes large packing dimension,therefore,takes much volume weight.The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected]

Air Conditioner Fan Motor YDKS-18-4

Air Conditioner Fan Motor YDK-18-4 2

YDKS-18-4

Item: Air Conditioner Fan Motor YDKS-18-4

For air conditioner indoor unit as replacement part.

Parameter: 220V-240V,50Hz,18W,0.2A

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Air Conditioner Fan Motor YDKS-18-4
Models & Details for “Air Conditioner Fan Motor YDKS-18-4”

YDKS-18-4

Buying guide
  • The item  is available for retail and wholesale;
  • The item takes large packing dimension,therefore,takes much volume weight.The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected]

Solar Panel 240W polycrystalline

Solar Panel 240W polycrystalline

Solar Panel 240W polycrystalline

Solar Panel 240W polycrystalline

Stainless Steel Flathead Bolts,Hexagon socket

Air Conditioner Fan Motor YDK-18-4 3

Stainless-Steel-Flathead-BoltItem: Stainless Steel Flathead Bolts,Hexagon socket, M6 series, for Furniture Connectors

Short Description: Stainless steel connector bolts / furniture screws with hex drive and low profile, decorative head.

Materials: stainless steel

Size/Dimension:M6x40mm,M6x50mm,M6x60mm,M6x70mm,M6x80mm,etc.(more); For M4,M5 series,pls contact seller([email protected])

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Stainless Steel Flathead Bolts,Hexagon socket
Models & Details for “Stainless Steel Flathead Bolts,Hexagon socket”

Flat-Head-Hexagon-socket-bolt

M6-Furniture-Connectors

stainless steel Furniture Connectors

ss bolt specification

ss-bolt-drawing

Buying guide to “Stainless Steel Flathead Bolts,Hexagon socket”
  • The item  is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please more size,please contact us to email: [email protected]

Oval reducer for ventilation pipe

Air Conditioner Fan Motor YDK-18-4 4

Oval reducer for ventilation pipe

Item: Oval reducer for ventilation pipe

Short Description: accept to custom Oval reducer for your ventilation project

Materials:Galvanized steel panel

Size/Dimension: according to your size required

Min. Order: 1unit

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Oval reducer for ventilation pipe
Buying guide
  • The item  is available for retail and wholesale;
  • The item takes large packing dimension,therefore,takes much volume weight.The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected]

Titanium Coil immersion type heat exchanger

Air Conditioner Fan Motor YDK-18-4 5

HVAC Parts >>Refrigerating Parts & Heating Elements>>Heat Exchangers>>Titanium Coil  immersion type heat exchanger

Titanium Coil immersion type heat exchanger

Item: Titanium Coil  immersion type heat exchanger

Short Description: High quality titanium tube coil heat exchanger immersion type,flowing refrigerant.It has performance of corrosion resistant,generally used for seafood, freshwater and seawater cooling & heating (which can be included in the titanium evaporator titanium electric heating rods). Titanium evaporator specifications lists from 1/2HP to 60HP.

Materials:coil is made from titanium,brass fittings.

Size/Dimension:1HP,1.5HP,2HP,3HP,4HP,5HP, … …
9000BTU,120BTU,15000BTU,18000BTU,… …

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Titanium Coil  immersion type heat exchanger
Models & Details for “Titanium Coil  immersion type heat exchanger”

Product advantages:
1. Industrial seamless titanium tube (TA1) production;
2. No copper nut connection, safe and reliable use direct immersion;
3. Intuitive inside and outside of the entire product;
4. easy to clean;
5. Can be customized.

Features:
1. The titanium tube heat exchanger made of high quality industrial titanium Seiko production, up 99.8% purity titanium, corrosion resistance, high conductivity, heat resistance, suitable for low concentration, acidic liquid processing and cooling; surface is not easy oxidation layer, do not pollute the media, environmental protection, non-toxic, non-fouling, clogging.
2. The product through professional welding process, welding interfaces are tight and difficult to leak.
3. Subtract the conventional manufacturing processes. The link with the new method to achieve security combined with titanium and copper. No leakage, safe and reliable.
4. Simple structure titanium tube heat exchanger, high pressure, using immersive structure, to be installed in the heat of the container can be made based on single or multi-layer container.
5.Titanium tube specification 19×0.6mm,can stand 3.0Mpa pressure.

Applications:
The products are widely used in various types of seafood farming, water heat exchanger, brine heat exchangers, chemical, food, pharmaceutical, metallurgy, refrigeration, light industry, electroplating industry, alumina trough, salt, paper, ultrasonic, electronic communications, centralized supply heat and other industries and fields.

titanium coil evaporator immersion type

Buying guide to “Titanium Coil  immersion type heat exchanger ”
  • The item  is available for retail and wholesale;
  • The item takes large packing dimension,therefore,takes much volume weight.The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected]om
General Knowledge on “Titanium tube”

Titanium-tubeTitanium tube is light weight, high strength, excellent mechanical properties. It is widely used in heat exchange equipment, such as a tube heat exchangers, plate heat exchanger tube, snake tube heat exchangers, condensers, evaporators and transportation pipelines.
Titanium is a new type of metal, and the performance of the carbon-containing titanium impurity content of nitrogen, hydrogen, oxygen and so on, the most pure titanium iodide impurities is not more than 0.1%, but its low strength, high ductility. 99.5% for the performance of industrial pure titanium: density ρ = 4.5g / cm3, a melting point of 1725 ℃, thermal conductivity λ = 15.24W / (mK), tensile strength σb = 539MPa, elongation δ = 25%, necking rate ψ = 25%, the elastic modulus E = 1.078 × 105MPa, the hardness HB195. Detailed performance titanium tube as follows:
(1) high specific strength
The density of titanium is generally about 4.5g / cm3, only 60% of steel, titanium’s strength was close to the strength of ordinary steel, some high-strength titanium alloy structural strength than a lot of steel. Therefore, the ratio of titanium alloy strength (strength / density) is much larger than other metallic structural materials, see Table 7-1, can be made out of high unit strength, rigidity, lightweight parts and components. Currently aircraft engine components, skeleton, skin, so the use of titanium fasteners and landing gear.
(2) high thermal strength
Temperature hundreds of degrees higher than aluminum, at moderate temperatures can still maintain the desired strength, long-term work at a temperature of 450 ~ 500 ℃ of these two types of titanium in the range of 150 ℃ ~ 500 ℃ still very high strength, and aluminum at 150 ℃ decreased significantly when compared strength. Titanium’s operating temperature up to 500 ℃, aluminum is below 200 ℃.
(3) corrosion resistance
Titanium work in humid atmosphere and seawater, which is far superior corrosion resistance of stainless steel; for pitting, etching, stress corrosion resistance is particularly strong; alkali, chloride, chlorine organic materials, nitric acid, sulfuric acid and so it has excellent corrosion resistance. However, the corrosion resistance of titanium with a reduction of oxygen and chromium salts medium is poor. Commonly used in seafood brackish water cooling, heating heat exchanger (which can be included on titanium electric heating rods in titanium evaporator).
(4) good low temperature performance
Titanium alloys at low and ultra-low temperature, retain their mechanical properties. Low temperature performance, low interstitial elements of titanium, such as TA7, at -253 ℃ can maintain a certain degree of plasticity. Thus, titanium is also an important low temperature structural materials.
(5) The chemical activity of large
Chemical activity of titanium is large, a strong chemical reaction with atmospheric O, N, H, CO, CO2, water vapor, ammonia and the like. Carbon content greater than 0.2%, it will form a hard TiC in titanium alloys; the temperature is high, and the role of N will form TiN hard surface; above 600 ℃, high hardness of hardened layer of titanium absorbs oxygen is formed ; hydrogen content increased, brittle layer will form. Absorbing gas generated brittle surface layer depth of up to 0.1 ~ 0.15 mm, the degree of hardening of 20% to 30%. Titanium is also large chemical affinity, easy and sticking friction surface.
(6) thermal conductivity, small elastic modulus
Thermal conductivity of titanium λ = 15.24W / (mK) approximately 1/4 of nickel, iron 1/5, 1/14 of aluminum, while the thermal conductivity of various titanium decreased by 50% than the thermal conductivity of titanium. The elastic modulus of about 1/2 of titanium alloy steel, so the poor rigidity, deformation, not making slender rod and thin-walled parts, cutting the amount of the machined surface rebound large, about 2 to 3 stainless steel times, causing intense friction of tool flank, adhesion, adhesive wear.

HVAC Parts >>Refrigerating Parts & Heating Elements>>Heat Exchangers>>  Titanium Coil in shell Heat Exchanger

Air Conditioner Fan Motor YDK35-6

Air Conditioner Fan Motor YDK-18-4 6

Air Conditioner Fan Motor YDK35-6

Item: Air Conditioner Fan Motor YDK35-6

For air conditioner outdoor unit.

Parameter: 220V,50Hz,35W,0.35A

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Air Conditioner Fan Motor YDK35-6
Models & Details for “Air Conditioner Fan Motor YDK35-6”

YDK35-6

Buying guide
  • The item  is available for retail and wholesale;
  • The item takes large packing dimension,therefore,takes much volume weight.The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected]

Air Conditioner Fan Motor YDK29-61

Air Conditioner Fan Motor YDK-18-4 7

Air Conditioner Fan Motor YDK29-61

Item: Air Conditioner Fan Motor YDK29-61

For air conditioner outdoor unit as replacement part.

Parameter: 220V,50Hz,43W,0.43A

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Air Conditioner Fan Motor YDK29-61
Models & Details for “Air Conditioner Fan Motor YDK29-61”

YDK 29-61 IMAGE1YDK 29-61 IMAGE2 YDK 29-61 IMAGE3 YDK 29-61 IMAGE4YDK29-61-aluminium-wire YDK29-61-copper-wire

Buying guide
  • The item  is available for retail and wholesale;
  • The item takes large packing dimension,therefore,takes much volume weight.The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected]

Square egg crate grille with round connector

Air Conditioner Fan Motor YDK-18-4 8

Square egg crate grille with round connector

Item: Square egg crate grille with round connector

  • Be available in three size,100mm,125mm,150mm diam round neck
  • Square face, with eggcrate blades.
  • Lightweight rgid construction.
  • A low cost and high usage for the ventilation and HVAC system .
  • The eggcrate air duct diffuser have a tapered neck for easy duct connection.

Materials: Plastic ABS

Size/Dimension:Be available in dia.100mm,125mm,150mm round neck

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Square egg crate grille with round connector
Models & Details for “Square egg crate grille with round connector”

Features:

  • Be available in three size,100mm,125mm,150mm diam round neck
  • Square face, with eggcrate blades.
  • Lightweight rgid construction.
  • A low cost and high usage for the ventilation and HVAC system .
  • The eggcrate air duct diffuser have a tapered neck for easy duct connection.

Constructions:

These eggcrate air duct grilleare injection moulded from white A.B.S. plastic and easy to install via four screw holes located behind the removable face.

Applications:

  • The eggcrate ventilation grilles are suitable for both internal and  external applications and can be either mounted on ceiling or walls of vantilation and HVAC system
  •  Duct is able to be installed onto a neck located at the rear of the air duct diffuser.

square to round 150mm-1

square to round 150mm-2eggcrate-air-diffuser eggcrate air grille diffuser

Buying guide to “Square egg crate grille with round connector ”
General Knowledge on “Square egg crate grille with round connector”

air grille production workshop