logo

July, 2014

now browsing by month

 

Wind knife and vibration whip air duct cleaner

Wind knife and vibration whip air duct cleaner 1

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>>Wind knife and vibration whip air duct cleaner

Wind knife and vibration whip air duct cleaner–Air blade cleaning

Wind knife and vibration whip air duct cleaner–Air blade cleaning GX-08-8

The core technology of the air blade is that the compressed air of 0.6MPa-1.2MPa generated by the compressor passes through the compressed air hose and is delivered to the interior air duct to be cleaned. Select the nozzles of different types at the end of air hose and loosen the dust on the interior wall of air duct thoroughly by brushing onwards, brushing backwards, and central brushing. Meanwhile, absorb the loosened dust completely by high-power dust collector. Whether the cleaning result meets the requirement can be observed from the infrared monitoring video equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made.

Technical Data: 
Types and material of air duct to be cleaned:large rectangular or square ducts made of metal and composite material
Operating air pressure:0.6Mpa -1.2Mpa
Range of cleaning: height 30-2000mm X width 30-2000mm, with diameter of Φ30—Φ2000
Standard:
(1) 6 quick-connect rigid air levers and 12 quick-connect flexible air levers
(2) One standard front spraying nozzle, one rear spraying nozzle, and one middle spraying nozzle
(3) Standard front spraying vibration whip, rear spraying vibration whip, and standard vibration whip
(4) A manual gun-type control valve and two reels of high-pressure air connecting hose
(5) A combined support used for large air duct cleaning (including the combined support used for the camera)
Optional:
(1) Complete set of synchronous monitoring and recording system
(2) Complete set of rotational and spraying sterilizer and high-intensity UV bactericidal lamp

 


 

Wind knife and vibration whip air duct cleaner–Vibration Whip Cleaning

Wind knife and vibration whip air duct cleaner–Vibration Whip Cleaning GX-08-8

The working principle of vibration whip is basically similar to that of air blade. The nozzle is not adopted at the front end. The customized hoses in different lengths under the compressed air are used to loosen the dust on the interior wall of air duct through high-speed and intensive whipping and compressed air brushing. At the same time, the high-power dust collector absorbs the loosen dust completely. It is particularly effective for cleaning flat air ducts with small-diameter, flat, and super ducts. Whether the cleaning result meets the requirement can be observed from the infrared monitoring video
equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made.

Technical Data: 
Types and material of air duct to be cleaned:large rectangular or square ducts made of metal and composite material
Operating air pressure:0.6Mpa -1.2Mpa
Range of cleaning: height 30-2000mm X width 30-2000mm, with diameter of Φ30—Φ2000
Standard:
(1) 6 quick-connect rigid air levers and 12 quick-connect flexible air levers
(2) One standard front spraying nozzle, one rear spraying nozzle, and one middle spraying nozzle
(3) Standard front spraying vibration whip, rear spraying vibration whip, and standard vibration whip
(4) A manual gun-type control valve and two reels of high-pressure air connecting hose
(5) A combined support used for large air duct cleaning (including the combined support used for the camera)
Optional:
(1) Complete set of synchronous monitoring and recording system
(2) Complete set of rotational and spraying sterilizer and high-intensity UV bactericidal lamp

 

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>>Wind knife and vibration whip air duct cleaner

Air Duct Tornado Cleaning Equipment

Tornado Cleaning System

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>>

Air Duct Tornado Cleaning Equipment

Air Duct Tornado Cleaning Equipment

1, Φ50, 15-meter-long flexible straw one,
2, an aluminum tip
3, Φ50, 3-meter-long flexible straw one,
4, tee 1, Ф50mm hoop four

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>>  Air Duct Tornado Cleaning Equipment

Chiller tube cleaning equipments

Wind knife and vibration whip air duct cleaner 2

air conditioner cleaning,washing,maintenance and comfort improvementAC-High-Pressure-Cleaning-1Sterilizing-machine-01Cleaning-sterilizing-01AC-High-temp-Cleaning-1all-in-one-banner-1Wind knife and vibration whip air duct cleaner 3AC-washing-bag-1dust-cleaning-and-suction-label-1air-speed-and-temperature-label-1interior-inspector-label-1air-filter-label-1auxiliary-kit-banner-1Robot-Cleaning-banner-1Rotary-brush-Cleaning-banner-1Wind knife and vibration whip air duct cleaner 4Wind knife and vibration whip air duct cleaner 5Duct-Sterilizing-banner-1ozone-sterilizing-label-1
Wind knife and vibration whip air duct cleaner 6

Item: Flexible Shaft Duct and Chiller Tube Cleaning Machine

Short Description:Chiller and heat exchanger efficiency is affected more by the cleanliness of heat transfer surfaces than any other single factor. Given the fact that a chiller typically can have several miles of tubing making up the condenser and evaporator, it makes sense to keep chiller tubes as clean as possible by using a combination of water treatment and planned outages for tube cleaning and other major maintenance tasks. As contaminants accumulate on chiller tube surfaces, efficiency declines rapidly. Contaminants can range from mud, sand and algae to hard mineral scales, which increase thermal resistance and cause the chiller to work harder to meet demand, thereby consuming more energy.The following method is to utilize electric motor, to rotate a flexible shaft. It is encased in a plastic casing that transports water to the cleaning tool. Chiller tube cleaning tools range from a variety of brushes to buffing tools, hones and scraper tools. They are capable of cleaning almost all types of deposits, including hard scale. The operator simply feeds the flexible shaft through the tubes to brush and flush in one operation.

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Flexible Shaft Condenser Chiller Tube Cleaning Machine
 Type A1–Easy-taking & Single system  “Flexible Shaft Duct and Chiller Tube Cleaning Machine”

Type A1: Type of easy-taking with single system,not heavy and easy to take.

Wind knife and vibration whip air duct cleaner 7 Wind knife and vibration whip air duct cleaner 8 Wind knife and vibration whip air duct cleaner 9 Wind knife and vibration whip air duct cleaner 10 Wind knife and vibration whip air duct cleaner 11 Wind knife and vibration whip air duct cleaner 12 Wind knife and vibration whip air duct cleaner 13

Type A1 Features and Vantages:
With single working system ,With automatic, manual and remote control, high power, high efficiency motor, powerful, can easily drive shaft with high speed cleaning work.
product description:
Automatic flexible shaft cleaning machine is designed for cleaning chiller tube,is a special cleaning tools, use AC motor as a power source to drive the brush rotated by the flexible shaft mechanically to dust or dirt inside the pipe loose , with spraying high pressure  water to flush to make the pipe wall to achieve a clean goal.

Dimension and Parameter:
220V,50HZ,5A,375W;
Motor rotary speed: 0-1400r/min,it can be regulated;
Chiller Tube Cleaning flexible shaft long 7.2 meter;
Chiller Tube Cleaning Brush long 150mm;dia.from 6.4mm to 25.4mm .
Chiller Tube Cleaning flexible shaft can be 6mm, 8mm,10mm,12mm. Long 15meters.
Machine weight:13kgs;
Type of  single working system.

 Type A2–Easy-taking & Dual system  “Flexible Shaft Duct and Chiller Tube Cleaning Machine”

Type A2 : Type of easy-taking with dual system,not heavy and easy to take.

Wind knife and vibration whip air duct cleaner 14 Wind knife and vibration whip air duct cleaner 15 Wind knife and vibration whip air duct cleaner 16 Wind knife and vibration whip air duct cleaner 17 Wind knife and vibration whip air duct cleaner 18

Type A2 Features and Vantages:
With single working system ,With automatic, manual and remote control, high power, high efficiency motor, powerful, can easily drive shaft with high speed cleaning work.
product description:
Automatic flexible shaft cleaning machine is designed for cleaning chiller tube,is a special cleaning tools, use AC motor as a power source to drive the brush rotated by the flexible shaft mechanically to dust or dirt inside the pipe loose , with spraying high pressure  water to flush to make the pipe wall to achieve a clean goal.

Dimension and Parameter:
220V,50HZ,5A,375W;
Motor rotary speed: 0-900r/min,it can be regulated;
Chiller Tube Cleaning flexible shaft long 7.2 meter;
Chiller Tube Cleaning Brush long 150mm;dia.from 6.4mm to 25.4mm .
Chiller Tube Cleaning flexible shaft can be 6mm, 8mm,10mm,12mm. Long 15meters.
Machine weight:15kgs;
Type of dual working system.(The second system can help you to continue working once the first system happen problem).

 Type B1–Portable & Single system  “Flexible Shaft Duct and Chiller Tube Cleaning Machine”

Type B1 Portable type with single system,with castors and pushable

Wind knife and vibration whip air duct cleaner 19 Wind knife and vibration whip air duct cleaner 20 Wind knife and vibration whip air duct cleaner 21 Wind knife and vibration whip air duct cleaner 22

Type B1 Features and Vantages:
With single working system ,With automatic, manual and remote control, high power, high efficiency motor, powerful, can easily drive shaft with high speed cleaning work.
product description:
Automatic flexible shaft cleaning machine is designed for cleaning chiller tube,is a special cleaning tools, use AC motor as a power source to drive the brush rotated by the flexible shaft mechanically to dust or dirt inside the pipe loose , with spraying high pressure  water to flush to make the pipe wall to achieve a clean goal.

Dimension and Parameter:
220V,50HZ,5A,400W;
Motor rotary speed: 0-1400r/min,it can be regulated;
Chiller Tube Cleaning flexible shaft long 7.2 meter;
Chiller Tube Cleaning Brush long 150mm;dia.from 6.4mm to 25.4mm .
Chiller Tube Cleaning flexible shaft can be 6mm, 8mm,10mm,12mm. Long 15meters.
Machine weight:26kgs;
Portable type.
Type of single working system.

 Type B2–Portable & dual system  “Flexible Shaft Duct and Chiller Tube Cleaning Machine”

Type B2 Portable type with dual system,with castors and pushable

Wind knife and vibration whip air duct cleaner 23 Wind knife and vibration whip air duct cleaner 24 Wind knife and vibration whip air duct cleaner 25 Wind knife and vibration whip air duct cleaner 26

Type B2 Features and Vantages:
With single working system ,With automatic, manual and remote control, high power, high efficiency motor, powerful, can easily drive shaft with high speed cleaning work.
product description:
Automatic flexible shaft cleaning machine is designed for cleaning chiller tube,is a special cleaning tools, use AC motor as a power source to drive the brush rotated by the flexible shaft mechanically to dust or dirt inside the pipe loose , with spraying high pressure  water to flush to make the pipe wall to achieve a clean goal.

Dimension and Parameter:
220V,50HZ,5A,400W;
Motor rotary speed: 0-900r/min,it can be regulated;
Chiller Tube Cleaning flexible shaft long 7.2 meter;
Chiller Tube Cleaning Brush long 150mm;dia.from 6.4mm to 25.4mm .
Chiller Tube Cleaning flexible shaft can be 6mm, 8mm,10mm,12mm. Long 15meters.
Machine weight:26kgs;
Portable type.
Type of dual working system.(The second system can help you to continue working once the first system happen problem).

Chiller tube cleaning equipments

Buying guide to “Flexible Shaft Condenser Chiller Tube Cleaning Machine”
  • The item  is available for retail and wholesale;
  • The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected]
About  “Flexible Shaft Condenser Chiller Tube Cleaning Machine”

These chiller tube cleaning devices utilize  motor to rotate a flexible shaft. It is encased in a plastic casing that transports water to the cleaning tool. Chiller tube cleaning tools range from a variety of brushes to buffing tools, hones and scraper tools. They are capable of cleaning almost all types of deposits, including hard scale. The operator simply feeds the flexible shaft through the tubes to brush and flush in one operation.

Advantages:

  • Affordable – initial outlay is minimal and the cost of consumables is reasonable
  • Simple to use – little training, or expertise, is required
  • Requires only one operator – reduces labor
  • Chiller tubes are left thoroughly cleaned – better heat transfer
  • Many models available – from simple, no-frills machines to more advanced units, incorporating mechanical shaft feed, bi-directional rotation and variable speed
  • Most effective method for cleaning newer chillers – that use internally enhanced tubes (more on this later)
  • Only one end of the chiller tube needs to be opened for cleaning

Air Duct Ozone Disinfection Equipment

Wind knife and vibration whip air duct cleaner 27

air conditioner cleaning,washing,maintenance and comfort improvementAC-High-Pressure-Cleaning-1Sterilizing-machine-01Cleaning-sterilizing-01AC-High-temp-Cleaning-1all-in-one-banner-1Wind knife and vibration whip air duct cleaner 28AC-washing-bag-1dust-cleaning-and-suction-label-1air-speed-and-temperature-label-1interior-inspector-label-1air-filter-label-1auxiliary-kit-banner-1Robot-Cleaning-banner-1Rotary-brush-Cleaning-banner-1Wind knife and vibration whip air duct cleaner 29Shaft-Cleaning-banner-1Duct-Sterilizing-banner-1Wind knife and vibration whip air duct cleaner 30
HVAC Parts >>Air Conditioner Spare Parts>>Materials for Air Conditioner Cleaning and Maintenance>>Air Conditioner Cleaning Machines And Tools>>Duct Air Conditioner Cleaning Machines and Tools>>Air Duct Ozone Disinfection Equipment

Air Duct Ozone Disinfection Equipment

Item: Air Duct Ozone Disinfection Equipment

Short Description: This product is air purification disinfection equipment for central air conditioning and ventilation ducts. The internal ozone generation equipment use the latest devices and a variety of protection circuits, with excellent performance and extremely long working life, can be widely used in various large-scale wind after the pipe cleaning where required to be sterilized places.
Features: light weight, convenient and efficient disinfection, non-corrosive, non-irritating odor

Types: Disinfection ozone: 10g,20g,30g / h

Place of origin: China , Sell to worldwide.

Order or Inquiry on “Air Duct Ozone Disinfection Equipment
Models & Details for “Air Duct Ozone Disinfection Equipment”

Features:

Working Voltage: AC 220V ;
Noise: ≤ 50db;
Power: 230W ;
Disinfection ozone: 1 \ 2 \ 30000MG / h ;
Disinfection and purification rate: 99.99% ;
Efficiency: ≤ 300 \ 600 \ 1000 m / h ;
Working mode: air source ozone ;
Weight: ≤ 10KG ;
With castors,Portable:

Application :
This machine is widely used for duct cleaning project.It let you easily do with all types(rectangle or round,big or small,high or low) ventilation air conditioner duct,air purification disinfection,save working time and improve cleaning effect.

Ozone Disinfection procedure-1 Ozone Disinfection procedure-2 Ozone Disinfection procedure-3 Ozone Disinfection procedure-4

Space cubicDisinfection time setting
30-60m³20minutes
60-150m³40minutes
150-240m³60minutes
>240m³>60minutes
Buying guide to “Air Duct Ozone Disinfection Equipment ”
  • The item  is available for retail and wholesale;
  • The item takes large packing dimension,therefore,takes much volume weight.The place of origin is in China,when you buy one or two,please consider freight(by air or by sea) into the cost;
  • Accept bulk order with Container delivery;
  • Please contact us to email: [email protected]
  • If you want to do duct cleaning project,it is your best choice.

HVAC Parts >>Air Conditioner Spare Parts>>Materials for Air Conditioner Cleaning and Maintenance>>Air Conditioner Cleaning Machines And Tools>>Duct Air Conditioner Cleaning Machines and Tools>>Air Duct Ozone Disinfection Equipment

Flexible-shaft air duct cleaner

Wind knife and vibration whip air duct cleaner 31

Home>>Air Conditioner Spare Parts >>Air Conditioner Maintenance>>Air Duct Cleaning Equipments>>Flexible-shaft air duct cleaner

Standard flexible-shaft air duct cleaner GX-08-7A

Model: GX-08-7A , Standard flexible-shaft air duct cleaner (tornado cleaning system)

For those ventilation ducts such as round flexible conduit, round and square ducts, the special flexible-shaft cleaner will be available for cleaning the round and square duct with different specifications by replacing the brush with different diameter. The specific adapter is reserved in the front end of flexible shaft to connect with the dust collector. Use the robot with the special high-pressure dust collector may fulfill the function of cleaning and dust absorption for the above-mentioned air ducts (direct-dust-absorption method)(tornado cleaning system). When the end of the flexible shaft is moving in the
air duct, it will concurrently pound the air duct to loosen the dust accumulated, and the dust is absorbed from the other end of the air duct simultaneously by the specific dust collector (raised-dust-absorption method).

Technical Data and Standard Configuration: 
Dimensions:500mm (Length) X 380mm (Width) X 460mm (Height)
Weight:35Kg
Voltage:220VAC/50Hz, power: 750W
Types and material of air duct to be cleaned:Rectangular or square ducts made of metal and composite material
Cleaning length:15 meters (equipped with flexible shaft or semi-hard shaft), length can be increased or decreased according to requirements
Cleaning mode:Rotate the cleaning shaft left or right for option
Rotation speed of brush:850R.PM, cleaning torque: >3N.m
Cleaning method:Raised-dust suction method or direct dust suction method (tornado cleaning system, with maximum vacuum is up to 20000 Pa)
Range of cleaning: Height 100-500mm X Width 100-1500mm, with diameter of Φ100–Φ500
Optional: 
(a) Complete set of synchronous monitoring and recording system
(b) Complete set of rotational and spraying sterilizer and high-intensity UV bactericidal lamp.


 

Intelligent Flexible-Shaft Air Duct Cleaner GX-08-7B

Model: GX-08-7B, Intelligent Flexible-Shaft Air Duct Cleaner (Intelligent Tornado Cleaning System)

The unit adopts the intellectual control technology combing the computer SCM and frequency converter, which features most highly completed performance in the domestic market. It is a typical and standard configuration for the flexible-shaft-cleaning method. Based on the servo function of the computer, the brush may automatically reciprocate to clean the rectangular air duct with different specification in horizontal direction. Meanwhile, the brush may move in the air duct in axial direction. In addition to the automatic horizontal function, the unit also has the function of independent left-rotating
and right-rotating used to clean the round and square air duct with different specification. The specific adapter is reserved in the front end of flexible shaft to connect with the dust collector. Use the robot with the special high-pressure dust collector may fulfill the function of cleaning and dust absorption for the above-mentioned air ducts (direct-dust-absorption method) (tornado cleaning system). When the end of the flexible shaft is moving in the air duct, it will concurrently pound the air duct to loosen the dust accumulated, and the dust is absorbed from the other end of the air duct simultaneously by the specific dust collector (raised-dust-absorption method). Whether the cleaning result meets the requirement can be observed from the infrared monitoring video equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made.

Technical Data and Standard Configuration: 
Dimensions:500mm (Length) X 380mm (Width) X 460mm (Height)
Weight:37Kg
Voltage:220VAC/50Hz, power: 850W
Types and material of air duct to be cleaned:rectangular or square ducts made of metal and composite material
Cleaning length:15 meters (equipped with flexible shaft or semi-hard shaft), length can be increased or decreased according to requirements
Cleaning mode:Rotate the cleaning shaft left or right, automatic horizontal reciprocating rotation, and stepless speed regulation modes for option
Rotation speed of brush:350-1400R.PM, cleaning torque: >3N.m
Cleaning method:raised-dust suction method or direct dust suction method (tornado cleaning system, with maximum vacuum is up to 20000 Pa)
Range of cleaning: Height 100-500mm X Width 100-2000mm, with diameter of Φ100–Φ500
Video recording system:complete set of intelligent synchronous monitoring and recording system, video in standard MP4 format which can be converted into other formats and cut, and equipped with storage device with capacity of 160G or more.
Optional:Complete set of rotational and spraying sterilizer and high-intensity UV bactericidal lamp.


 Air Duct Tornado Cleaning Equipment

Air Duct Tornado Cleaning Equipment

1, Φ50, 15-meter-long flexible straw one,
2, an aluminum tip
3, Φ50, 3-meter-long flexible straw one,
4, tee 1, Ф50mm hoop four

 

Home>>Air Conditioner Spare Parts >>Air Conditioner Maintenance>>Air Duct Cleaning Equipments>>Flexible-shaft air duct cleaner

Air Duct Cleaning Micro Unit Equipment

Wind knife and vibration whip air duct cleaner 32

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>>

Air Duct Cleaning Micro Unit Equipment (With Functions of Examination, Cleaning, Dust Suction and Spraying)

Air Duct Cleaning Micro Unit Equipment

It includes the manually 360°-rotating pitching infrared camera. With the movable or portable console, it is applicable for the examination, cleaning, dust absorption, and spraying for the mini flat air duct, air supply duct of FCU, fresh air supply duct in each room of hotel, fresh air branch duct in office where the automatic robot cannot access. Whether the cleaning result meets the requirement can be observed from the infrared monitoring video equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made.

Technical Data
Dimensions:
Micro air duct inspection machine: 150mm (Length) ×120mm (Width) × 95mm(Height)
Micro air duct cleaning machine: 220mm (Length) ×120mm (Width) × 95mm(Height)
Micro air duct dust suction and spraying machine: 380mm (Length) × 260mm(Width) × 95mm (Height)
Weight: 1.5Kg, 2.4Kg, 2.9Kg
Voltage: 24VDC; power: 10W, 60W
Operating stroke:20 meters for standard configuration, can be extended to 100 meters according to requirements
Types and material of air duct to be cleaned: air supply duct of FCU and fresh air branch made of metal and composite material
Range of cleaning: height 100-200mm X width (no requirements), with diameter ofΦ150—Φ200
Standard:
(1) 420-line industrial color camera capable of 360° horizontal rotation and 180° pitching rotation
(2) Special suction head and ball-type spraying head (includes spray lance) used in the direct dust suction method
Optional:High-intensity UV bactericidal lamp.

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>>Air Duct Cleaning Micro Unit Equipment 

Semi-automatic Air Duct Cleaning Equipment

Wind knife and vibration whip air duct cleaner 33

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>>

Semi-automatic Air Duct Cleaning Equipment

Semi-automatic Air Duct Cleaning Equipment

It includes the manually 360°-rotating pitching infrared camera. Four height supports are used to match with cleaning heads of four specifications. With the movable or portable console, the robot will be able to clean air ducts of different specifications. The cleaning principle, functions, and effect are the same with that of the automatic cleaning robot. Whether the cleaning result meets the requirement can be observed from the infrared monitoring video equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made. Due to its small dimensions and the light weight, it is more suitable for cleaning the FRP air ducts and super air ducts. It is a simple version of automatic cleaning robot which is inexpensive and applicable for small enterprises.

Technical Data: 
Dimensions:
Machine1#, 300mm (Length) ×170mm (Width) × 140mm (Height)
Machine 2#, 300mm (Length) × 270mm (Width) × 180mm (Height)
Machine 3#, 300mm (Length) × 270mm (Width) × 230mm (Height)
Machine 4#, 300mm (Length) × 270mm (Width) × 280mm (Height)
Weight:5.5Kg, 6Kg, 7Kg, and 7.5Kg
Voltage:24VDC; power: 150W
Operating stroke:20 meters for standard configuration, can be extended to 100 meters according to requirements
Types and material of air duct to be cleaned: Large rectangular or square ducts made of metal and composite material.
Range of cleaning: Height 200-500mm X Width (no requirements), with diameter ofΦ200–Φ500
Standard:
(1) 420-line industrial color camera capable of 360° horizontal rotation and 180° pitching rotation
(2) As a supporting device of machine 1# – 4#, four groups of brushes:Φ220, Φ320, Φ420, Φ520
(3) As a supporting device of machine 1# -4#, four groups of supports:H200#, H300#, H400#, H500#
(4) Complete set of synchronous monitoring and recording system
Optional:Complete set of rotational and spraying sterilizer and high-intensity UV bactericidal lamp.

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>>Semi-automatic Air Duct Cleaning Equipment

Air Duct Detection Robot

Wind knife and vibration whip air duct cleaner 34

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>>

Air Duct Detection Robot


Air Duct Detection RobotAir Duct Detection Robot GX-08-2

Model GX-08-2: Video Detection and Sampling Robot

It is equipped with automatic 360°-rotating color pitching camera with high-intensity lighting, automatic jib-arm dust-collecting sampling unit, and the driving device (caterpillar or 4 x 4 wheel) for the robot to move in the air duct.
Professionals may correctly differentiate the conditions inside the air duct through observing the inside of air duct and the dust sample collected from the inside of the air duct. They will customize the solution of cleaning and sterilization and may attain the monitoring video information from the inside of the air duct at any time and make the MP4.

Technical Data and Standard Configuration: 
Dimensions:420mm (Length) X 270mm (Width) X 180mm (Height)
Weight:8Kg
Voltage:24VDC;power:75W
Operating stroke:20 meters for standard configuration, can be extended to 100 meters according to requirements
Running method:4X4 wheel or dual-caterpillar driving
Parameters of kinematic performance:obstacle crossing >45mm, climbing capacity >40°
Travel speed:0-12 m/min (stepless speed regulation)
Video recording and lighting:520-line industrial color camera, electrically rotating by 360°horizontal/90°pitching, four rear and front scatter-type high-intensity lighting (LED light source with low temperature and long service life)
Sampling method:Mechanical jib-type, automatically lifting, dust-collecting sampling unit

 

Air Duct Detection Robot GX-08-2B

Model GX-08-2B: Quantitative Intellectual Sampling Robot

It is equipped with automatic 360°-rotating color pitching camera with high-intensity lighting. The professionals may correctly differentiate the conditions at any time inside the air duct and based on the monitoring video information memory through the monitoring video system and make the MP4. Meanwhile, they may start the intellectual control procedure to operate the quantitative sampling. The system adopts micro vacuum power unit to collect the dust and microorganism under the closed condition and in fixed quantities (The collection is designed according to the standard modular multiplier with accurate measuring). The powerful vacuum unit is specifically designed to entirely collect the dust in the designated area. To ensure that the operation of one-off filter element and sampling probe is sterile, two kinds of sampling probe, i.e. wiping type and scratching type, are provided for your option. The robot will move in the air duct by the driving device and collect the sample any where inside the air duct. It is an ideal option for the professional detection agency

Technical Data and Standard Configuration:
Dimensions:340 mm (Length) X 240 mm (Width) X 200 mm (Height)
Weight:12.5Kg
Voltage:24VDC;power:225W
Operating stroke:20 meters for standard configuration, can be extended to 100 meters according to requirements.
Running method: Fully-enclosed dual-caterpillar driving (prevent the pollution effectively)
Kinematics parameters:obstacle crossing >45mm, climbing capacity >40°
Travel speed:0-12 m/min (stepless speed regulation)
Video recording and lighting:520-line industrial color camera, electrically rotating by 360°horizontal /90°pitching, four rear and front scatter-type high-intensity lighting (LED light source with low temperature and long service life)
Sampling method:fully-enclosed micro vacuum-power dust sampling and sampling by wiping for option
Sampling time: 30s as the standard (subject to be adjusted according to requirements)
Effective dimension of inspection: minimum inspection height: 220mm and minimum inspection width: 260mm


 

Controller

Air Duct Cleaning Robot Controller GX-08-1

With specific PLC programmable and intelligent operating system of equipment, the operator may know well about the conditions inside the air duct in time through the LCD screen. Operators control the actions of the robot by operating system to monitor and record the condition of the air duct before and after the cleaning (can make standard MP4) well as perform the procedures such as cleaning, dust absorption and spraying etc. It is the most major subsystem of the whole equipment

Technical Data
Dimensions:500 mm (Length) X 400mm (Width) X 230mm (Height)
Weight:14Kg
Voltage:Voltage input 220VAC/50Hz, voltage output 24VDC
Power: 150W
Standard: 
(1) 10.4′high-definition LCD,synchronous monitoring and recording system, Synchronously display rear and back channels, video in the standard MP4 format which can be converted into other formats and cut, and equipped with storage device with capacity of 160G or more.
(2) Standard industrial design, perfect procedure control system for safe moving, circuit overload or original element protecting system.
Optional:
(1) Four-wheel moving synchronous system of robot and the turning differential system.
(2) Ultrasonic automatic navigation control system for the robot to move along the wall in equidistance.
(3) Intelligent adjusting system for lifting the brush to clean the robot (adjust automatically according to the height of the air duct).
(4) Ultrasonic automatic alarming and shutdown system for moving robot encountering holes or caves.

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>>Air Duct Detection Robot

Air Duct Spraying and sterilizing equipments

Wind knife and vibration whip air duct cleaner 35

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>>Air Duct Spraying and sterilizing equipments

Air Duct Spraying and sterilizing robot

Air Duct Spraying and sterilizing robot

It is provided with rear and front infrared color camera with high-intensity lighting. The 360°rotational sprinkling unit ensures that the detergent will reach any point of the air duct. After the dust absorption is completed, the driving device (caterpillar or 4×4 wheel) is used for the robot to simultaneously move and spray the special detergent for cleaning and
sterilization. Whether the cleaning result meets the requirement can be observed from the monitoring video equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made.

Technical Data and Standard Configuration: 
Dimensions:460mm (Length) X 270mm (Width) X 175mm (Height)
Weight:10Kg
Voltage:24VDC; power: 90W
Operating stroke:20 meters for standard configuration, can be extended to
100 meters according to requirements
Types and material of air duct to be cleaned:rectangular or square ducts
made of metal and composite material
Sterilizing method:Use rotating ultrasonic atomization spraying method and
the “direct spraying contract method” popular in the world
UV sterilization:High-intensity UV bactericidal lamp (optional) with germicidal
efficiency of 98% – 100%
Running method:4X4 wheel or dual-caterpillar driving
Kinematics parameters:obstacle crossing >45mm, climbing capacity >40°
Travel speed:0-12 m/min (stepless speed regulation)
Video recording and lighting:rear and front 420-line industrial infrared color
cameras, four rear and front scatter-type high-intensity lighting (LED light
source with low temperature and long service life)


 Automatic Spraying and Sterilizing Pump

Automatic Spraying and Sterilizing Pump

with a 20m, 3m hose spraying of a equipped with highly efficient rotary spray head spraying
Operating Voltages: 220VAC/50Hz
Operating power: 150W, Weight: 9Kg
Dimensions: 380mm(L)*250(W)mm*220mm(H)


 

Controller

Air Duct Cleaning Robot Controller GX-08-1

With specific PLC programmable and intelligent operating system of equipment, the operator may know well about the conditions inside the air duct in time through the LCD screen. Operators control the actions of the robot by operating system to monitor and record the condition of the air duct before and after the cleaning (can make standard MP4) well as perform the procedures such as cleaning, dust absorption and spraying etc. It is the most major subsystem of the whole equipment

Technical Data
Dimensions:500 mm (Length) X 400mm (Width) X 230mm (Height)
Weight:14Kg
Voltage:Voltage input 220VAC/50Hz, voltage output 24VDC
Power: 150W
Standard: 
(1) 10.4′high-definition LCD,synchronous monitoring and recording system, Synchronously display rear and back channels, video in the standard MP4 format which can be converted into other formats and cut, and equipped with storage device with capacity of 160G or more.
(2) Standard industrial design, perfect procedure control system for safe moving, circuit overload or original element protecting system.
Optional:
(1) Four-wheel moving synchronous system of robot and the turning differential system.
(2) Ultrasonic automatic navigation control system for the robot to move along the wall in equidistance.
(3) Intelligent adjusting system for lifting the brush to clean the robot (adjust automatically according to the height of the air duct).
(4) Ultrasonic automatic alarming and shutdown system for moving robot encountering holes or caves.

 

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>> Air Duct Spraying and sterilizing equipments

Air duct whipping robot

Wind knife and vibration whip air duct cleaner 36

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>>

Air duct whipping robot

Air-duct-whipping-robot-GX-08-5C

Model: GX-08-5C

The equipment is provided with the pulse air hammer and air whip device with special patent design and possessing the sudden explosive. With the driving device (caterpillar or 4×4 wheel), the robot moves in the air duct. The robot will loosen the dust in the air duct in a sudden and get prepared for the dust absorbing robot to absorb the dust (direct-dust-absorption method) or for the special dust cleaner on the other end of the air duct to absorb the dust while loosening the dust (raised-dust absorption method). Whether the cleaning result meets the requirement can be observed from the monitoring
video equipment and the monitoring video information about the inside of the air duct at any time can be obtained. Standard MP4 can be made.

Technical Data and Standard Configuration: 
Dimensions:460mm (Length) X 270mm (Width) X 175mm (Height)
Weight:11Kg
Voltage:24VDC; power: 90W
Operating stroke:20 meters for standard configuration, can be extended to
100 meters according to requirements
Types and material of air duct to be cleaned:rectangular or square ducts
made of metal and composite material
Cleaning method:rotating pulse air hammer and rotating air whip
Operating air pressure:0.6MPa-1.2Mpa
Running method:4X4 wheel or dual-caterpillar driving
Kinematics parameters:obstacle crossing >45mm, climbing capacity >40°
Travel speed:0-12 m/min (stepless speed regulation)
Video recording and lighting:rear and front 420-line industrial infrared color
cameras, four rear and front scatter-type high-intensity lighting (LED light
source with low temperature and long service life)


 

Controller

Air Duct Cleaning Robot Controller GX-08-1

With specific PLC programmable and intelligent operating system of equipment, the operator may know well about the conditions inside the air duct in time through the LCD screen. Operators control the actions of the robot by operating system to monitor and record the condition of the air duct before and after the cleaning (can make standard MP4) well as perform the procedures such as cleaning, dust absorption and spraying etc. It is the most major subsystem of the whole equipment

Technical Data
Dimensions:500 mm (Length) X 400mm (Width) X 230mm (Height)
Weight:14Kg
Voltage:Voltage input 220VAC/50Hz, voltage output 24VDC
Power: 150W
Standard: 
(1) 10.4′high-definition LCD,synchronous monitoring and recording system, Synchronously display rear and back channels, video in the standard MP4 format which can be converted into other formats and cut, and equipped with storage device with capacity of 160G or more.
(2) Standard industrial design, perfect procedure control system for safe moving, circuit overload or original element protecting system.
Optional:
(1) Four-wheel moving synchronous system of robot and the turning differential system.
(2) Ultrasonic automatic navigation control system for the robot to move along the wall in equidistance.
(3) Intelligent adjusting system for lifting the brush to clean the robot (adjust automatically according to the height of the air duct).
(4) Ultrasonic automatic alarming and shutdown system for moving robot encountering holes or caves.

 

Home>>Air Conditioner Spare Parts>>Air Conditioner Maintenance>> Air Duct Cleaning Equipments>> Air duct whipping robot